supertanker

So funktioniert das bei Ford:

DTC C1095 (ABS Hydraulic Pump Motor Circuit Failure) — Sets when the ABS module detects an open circuit, a short to voltage or ground or a defective internal power transistor during normal operation or the ABS module self-test. The ABS module commands the pump motor ON for 100 ms (±6 ms), then commands the motor OFF and measures the voltage produced by the motor after 6 ms. If the voltage indicates that the motor is spinning at less than 500 rpm there may be a locked motor. If this condition is detected 4 times, then DTC C1095 is set. The pump motor is also checked for an open circuit 2 seconds after the most recent successful pump motor off command. If the pump motor feedback remains greater than 0.75 volt for more than 50 ms (±6 ms) after these conditions have been met, then DTC C1095 is set.