Sure i feel it.:D
I can accelerate from 1500-2000rpm on 2-nd gear with no problem. I do not need to switch 1-st gear like on KF engine.
It`s runs fast from 110-170km/h, i drove from Hamburg-Munchen on autobahn.
If you run on first gear at 1500-2000 rpm, the front wheels are spinning if you suddenly accelerate on 100%.
I thougt if i`ll put 15 stock wheels i`ll burn all tires.

I drag with the stock 2.0 KF Xedos. He starts from 3500-4000rpm
I just accelerate from 1500-2000rpm (without burning tires).
So here is the link on youtube, you should see, that KF Xedos (yellow lights) accelerates first, but i reached him before switching second gear.8);)
http://www.youtube.com/watch?v=HaEKu...layer_embedded

I now have problems with 2 oxygen sensors, diagnostics shows that they do not work. And i order new distributur cap with a rotor. I hope that more horses will return to my KL :)

Alcantara saloon
 

At first i had simple seats.
They were clean, good condition, driver`s seat had no holes.
You can see on the first picture what type of seats i had before.
I bought dirty alcantara saloon from Xedos 1998.
I put it all of, washed, and then put it back.

Future plans: buy Xedo9 alcantara rear seats, and make my drivers seat from that alcantara texture.
Here are pictures.

Electric seat
 

Also i put electric seat.8)
Future plans: to find electric seat from Right hand Xedos or Eunos 500. And put it in passenger side.

Side Mirrors (full electric)
 

Folding side mirrors.
I wanted to put them during 1,5 year.
As you know X6 had option when mirrors fold.
Here in Latvia i couldn`t find X6 folding mirrors, because we have a lot of Xedos 1992-1996 year only.
So i bought mirrors from Xedos 9 (red colour). :) Just put everything in mine body.
Made wiring and put original button.
Here you can see photos and a video on youtube.
http://www.youtube.com/watch?v=tlrDP3jK1po

Front door acoustics
 

I bought Alpine SPG17CS 16.5cm.
Put in stock place - no sound, and i can`t put original grill.
So i made this.

Continiu..

Continue..

More...

Once more...

nice work :D

I've got a question, you are using FK lower springs, I've got the same but my car isn't so low as yours. are you satisfied with them springs?